Quaser spindle and motor spindle repair
Brochexpress is an independent workshop specialising in the repair, maintenance and diagnostics of Quaser spindles and motor spindles. We operate from our sites in Beaurepaire (France, Auvergne-Rhône-Alpes) and Lussery-Villars (Switzerland) for precision machining manufacturers.
Quaser spindles and motor spindles equip many high-requirement vertical and horizontal production machining centres, particularly in the precision subcontracting, automotive and general engineering sectors. Drawing on our technical expertise, we support manufacturers — in France and across Europe — in the overhaul of their equipment and the optimisation of its availability. A properly maintained motor spindle is the guarantee of precise, repeatable and productive machining.
Quaser — Taiwanese manufacturer of machining centres
TLDR: Quaser is a Taiwanese manufacturer of vertical and horizontal machining centres, renowned for its reliable and high-performing solutions widely used in subcontracting SMEs across France and Europe, whose integrated spindles and motor spindles deliver day-to-day performance.
Quaser Machine Tools Inc. is a Taiwanese manufacturer renowned for its vertical and horizontal machining centres, widely used in precision subcontracting SMEs across France and Europe. Its motorised spindles and motor spindles, integrated into the MV, MH and UX ranges, are intended for precision machining in sectors such as subcontracting, automotive and general engineering. The maintenance of these assemblies requires a thorough knowledge of their architecture as well as suitable inspection resources.
Quaser spindles and motor spindles
TLDR: We handle repair across the entire range: spindles and motor spindles integrated into Quaser vertical and horizontal machining centres.
Our teams carry out the repair of Quaser spindles and motor spindles across the entire range: spindles and motor spindles integrated into vertical and horizontal machining centres. From the initial diagnosis to recommissioning, we restore the original performance of your equipment, respecting the expected tolerances and precision levels.
Quaser products covered (non-exhaustive list)
- Spindles and motor spindles for Quaser vertical machining centres (MV 184, MV 204, MV 354)
- Spindles and motor spindles for Quaser horizontal machining centres (MH 400, MH 500)
- Spindles for Quaser 5-axis machining centres (UX 300, UX 500)
- High-speed spindles for aluminium and composite machining
Your model is not listed? Contact us for confirmation.
Interfaces and specifications
High rotational performance and low vibration level · Variable speed ranges depending on the application
Our intervention
TLDR: Four complementary areas: on-site customer service, full diagnostics, preventive and corrective maintenance, overhaul and refurbishment — with testing and validation before return to production.
On-site customer service
- Removal of the motor spindle or spindle from the machine tool
- Secure packaging and transport to our workshops
- Reinstallation and recommissioning on site after repair
Full diagnostics
- Vibration analysis
- Inspection of geometry and clearances
- Measurement of temperatures and loads
- Checking of bearings and balancing
Preventive and corrective maintenance
- Disassembly and full inspection
- Replacement of precision bearings
- Mechanical and electrical overhaul
- Cleaning and reassembly in line with the manufacturer's recommendations
Overhaul and refurbishment
- Repair of damaged spindles and motor spindles
- Fine adjustments to recover original performance
- Testing and validation before return to production
Why entrust us with your Quaser spindles and motor spindles?
We work across the entire Quaser range without exclusivity, with the same expertise whatever the generation or model of your equipment
Removal and reinstallation directly on your machine tool, to minimise production downtime
Thorough command of the spindles and motor spindles integrated into Quaser machining centres
We support subcontracting SMEs, automotive suppliers and general engineering manufacturers over the long term
Our sites in Beaurepaire (Auvergne-Rhône-Alpes) and Lussery-Villars (Switzerland) allow us to respond quickly to French and European manufacturers
Lead times and warranty
- On-site service for removal: within 48h
- Repair lead time (diagnostics + recommissioning): around 20 days
- Warranty on repaired motor spindle: 12 months
Frequently asked questions
How much does a Quaser spindle or motor spindle repair cost?
The cost of a repair depends on the model, its condition and the extent of the work required. Each intervention is the subject of a personalised quotation, drawn up after diagnosis. Contact us for an assessment of your situation.
What are the lead times?
We work on site for removal within 48h. The full repair lead time (diagnostics, recommissioning) is around 20 days.
What warranty applies to a repaired spindle or motor spindle?
We offer a 12-month warranty on repaired spindles and motor spindles. The detailed conditions are specified in the quotation and the intervention report.
Do you work on Quaser machining centre spindles of all generations?
Yes. We handle all spindles and motor spindles integrated into Quaser machining centres, across all generations. Contact us with the reference of your equipment for confirmation.
Are you an official Quaser partner?
No. Brochexpress is an independent repair and maintenance workshop. We are neither affiliated with, nor a partner of, nor an authorised distributor of Quaser Machine Tools Inc. Our business covers independent maintenance of industrial equipment, permitted under the principle of referential trademark use (EU Trademark Directive 2015/2436 / French Intellectual Property Code, art. L.713-6).
A reliable partner for your industrial performance
Whether it is an emergency on-site intervention, a full workshop overhaul or a preventive maintenance programme, Brochexpress brings its expertise to your production. As an independent workshop, we work across the entire Quaser range — spindles and motor spindles for vertical, horizontal and 5-axis machining centres — with the responsiveness and rigour demanded by the most exacting industrial environments: precision subcontracting, automotive and general engineering.
Our teams are at your disposal from our sites in Beaurepaire (France) and Lussery-Villars (Switzerland) for a study of your needs, a diagnosis or a personalised quotation.
Request a quoteRelated services
Quaser® is a registered trademark of Quaser Machine Tools Inc. Brochexpress is neither affiliated with, nor a partner of, nor an authorised distributor of Quaser Machine Tools Inc. Our business covers independent repair and maintenance of industrial equipment, permitted under the principle of referential trademark use (EU Trademark Directive 2015/2436 / French Intellectual Property Code, art. L.713-6).